The lightweight Harrier 10x AF-Zoom 3G-SDI/HDMI Camera (Tamron MP3010M-EV) is extremely compact, measuring only 59 x 36 x 43mm. Video output options are HD-SDI, 3G-SDI or HD-VLC, including simultaneous HDMI and analog SD video.
The camera features a 10x optical zoom, a 5 Megapixel image sensor and provides Full HD video up to 1080p60. Tamron’s superior optical design, low reflection coating technologies, color blur reduction and high contrast enables this camera to deliver highest quality images.
For long cable length applications, we recommend the HD-VLC compression technology. It is available with this camera in combination with the BlueBird SDI Adapter. To learn more about our solution for HD video transmission over long distances, watch our video by selecting the video tab above.
The Harrier 3G-SDI Camera Interface Board, a part of this camera module, can be customized by providing project-based processing features.
Furthermore, the camera provides a multitude of functions, including Electronic Image Stabilization (EIS), Wide Dynamic Range (WDR), Day/Night function (ICR), Noise Reduction (3D+2D) and many more. Contact us to learn more.
| Image sensor | 1/2.8-type Sony IMX335 STARVIS CMOS sensor (progressive scan) |
| Effective no. of pixels | approx. 5.14M pixels |
| Pixel output (H x V) | 1920 x 1080; 1280 x 720 |
| Video format (HD) | 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/29.97, 1080p/25, 720p/60, 720p/59.4, 720p/50, 720p/30, 720p/29.97, 720p/25 Simultaneous LVDS and HDMI output. |
| Signal system (SD) | NTSC/PAL |
| Minimum illumination | 0.1 Lux (1/30sec, F1.8, 50%, Color, Typical) 0.025 Lux (1/30sec, F1.8, 50%, B&W, Typical) |
| Recommended illumination | 100 Lux to 100,000 Lux |
| S/N ratio | More than 50dB |
| Gain | Auto / Manual |
| Shutter speed | 1/1 to 1/10,000 sec |
| Sync system | Internal |
| Exposure compensation | -12dB to +12dB (total 13 steps) |
| Backlight compensation | ON / OFF |
| Gamma | 4 gamma curves (standard, straight, narrow, wide) |
| Aperture control | 16 steps |
| White balance | ATW1 (Narrow), ATW2 (Wide), One push, Manual (B, R), Indoor, Outdoor |
| AE (Auto exposure mode) | Auto, Manual, Priority Mode (shutter / iris) |
| Lens (wide to tele) | 10x optical zoom, f=3.3 ~ 33mm, F1.8 ~ 3.4 |
| Zoom mode | Standard / Variable / Direct |
| Zoom movement speed (wide to tele) | 1.7 sec (Focus Tracking ON) |
| Digital zoom | Up to 16x |
| Focusing system | Auto, Manual, One Push, AF Sensitivity |
| Horizontal viewing angle (wide to tele) | 59.2° (w) ~ 6.7° (t) (except when EIS is operated) |
| Minimum object distance (wide to tele) | Visible light: 10mm (wide) ~ 800mm (tele) 850nm: 10mm (wide) ~ 1200mm (tele) |
| EIS (Electronic Image Stabilization) | OFF/ON |
| Wide-dynamic range (Gamma) | OFF/ON |
| Day/Night (ICR) | OFF/ON/AUTO |
| Defog | OFF/ON (Level: 1~3) |
| Noise reduction (3D + 2D) | OFF/ON (Level: 1~5) |
| Privacy zone mask | Up to 8 places |
| Slow shutter | OFF/ON (max 1 sec) |
| Picture effects (black white) | OFF/ON |
| Picture freeze | OFF/ON |
| Electronic flip (e-flip) | OFF/ON |
| Mirror image | OFF/ON |
| Temperature readout | Available |
| Title display | OFF/ON (20 characters/line, max. 12 lines) |
| KEL30 Connector (J1) | The interface board is fitted with a 30-way miniature connector to link to the video output connector on the camera. Connector type: KEL USL00-30L. Mating cable: A 30-way micro coaxial cable (AS-CIB-USL30-100MM) is supplied with the camera. Other lengths are available. |
| Input/Output Connector (J2) | The interface board is fitted with an industry standard 4-way connector for Vsync/PWM signal output and test pattern/reset control inputs. Connector type: JST SM04B-SRSS-TB Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-002-B (see ordering information). See Harrier 3G-SDI Camera Interface Board datasheet (download tab) for pin assignments and control options. |
| Power and Control Connector (J3) | The interface board is fitted with an industry standard 9-way connector for power, serial control and analog video out. Connector type: JST SM09B-SRSS-TB Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-002-B (see ordering information). See Harrier 3G-SDI Camera Interface Board datasheet (download tab) for pin assignments and output options. |
| Analog Video Out (Pin 3, J3) | Standard resolution composite analog is simultaneously available in HD modes 720p50 (for PAL) and 720p60/59.94 (for NTSC). There are two options for the analog output, selectable via serial control: (a) the 1280 pixel wide HD image can be cropped to 960 wide, by cropping a 120 pixel strip off each side to make a 4:3 aspect ratio Standard Definition (SD) signal. (b) by pre-warping the image, such that when displayed on a HD monitor in the monitor’s stretch-to-fit mode, the original full-width HD signal will be displayed correctly at 16:9 aspect ratio. Both methods ensure the displayed pixels remain square and that the image is not distorted. |
| 3G-SDI Output Connector (J5) | The interface board is fitted with a Hirose H.FL Micro Coaxial Connector (75 Ohm). Connector type: Hirose Micro Coaxial Connector (Receptacle), part number H.FL-R-SMT(01). Mating connector: Use mating cable with 75 Ohm characteristic impedance, for example Hirose part number H.FL75-2LP-084H-A-100. A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-002-B (see ordering information). |
| Video and Control Mode DIP Switch (SW1) | The interface board is fitted with a 4-way DIP switch to select various video output and control modes. The DIP switches to select the Video Format are read on power-up only. Therefore, to change mode using the DIP switches, power down the camera, set the switches and then power up the camera. DIP switches will only be effective for the operating modes supported by the camera currently in use. See Harrier 3G-SDI Camera Interface Board datasheet (download tab) for the configuration of the DIP switch SW1. |
| Communications Mode Selection (SW2) | The interface board is also fitted with a 2-way DIP switch to select the serial communications standard. It allows to choose between RS-232 VISCA communications, RS-485 VISCA comms with RS-485 termination enabled, RS-485 VISCA comms with RS-485 termination disabled and TTL VISCA communications. See Harrier 3G-SDI Camera Interface Board datasheet (download tab) for the details and configuration of the DIP switch SW2. |
| Digital Transmission Standard Selection (SW3) | The interface board is fitted with a 1-way DIP switch to select the SMPTE or HD-VLC digital output standards. OFF = SMPTE compliant output. ON = HD-VLC compressed output. |
| Power requirement | 8V to 12V DC +/- 10% |
| Power consumption | approx. 3.5W (approx. 5.4W during motor operation – zoom and focus) |
| Operating temperature | -5°C to +60°C (recommended: 0°C to +40°C) |
| Storage temperature | -20°C to +60°C |
| Operating humidity | 20% to 80% (no condensation) |
| Storage humidity | 20% to 90% (no condensation) |
| Dimensions (L x W x H) | 59 x 35 x 43mm (L x W x H) |
| Weight | 74g |
| Download | File Type | File Size | |
|---|---|---|---|
Datasheets |
Datasheet Harrier 3G-SDI Camera Interface Board | 684.08 KB | |
| Datasheet Tamron MP3010M-EV | 98.57 KB | ||
Manuals & Quick Start Guides |
Harrier 3G-SDI CIB Quickstart Guide v1.6.3 | 699.57 KB | |
| Technical Reference Manual Tamron MP3010M-EV v1.4 | 2.38 MB | ||
Software |
Camera control software for Tamron MP3010M-EV - v1.00E | zip | 74.58 KB |
CAD Drawings & Data |
Mechanical Overview - AS-CIB-3GSDI-002-3010-A (Note: 3D CAD Model available on request, please contact us) | 569.54 KB | |
Other Downloads |
Technical Note - Coaxial cable selection for Harrier boards | 181.67 KB | |
| Technical Note - Troubleshooting guide for Harrier camera interface boards | 276.68 KB | ||
| White Paper - High-Definition Long-Reach Video Transmission | 741.89 KB | ||
| Brochure - Cameras for drones, UAVs and gimbals | N/A | N/A |
| Part number | Description |
|---|---|
| AS-CIB-3GSDI-002-3010-A |
Harrier 10x AF-Zoom 3G-SDI/HDMI Camera (MP3010); includes 100mm 30-way micro-coax cable AS-CIB-USL30-100MM, 50mm available upon request. |
| AS-CIB-3GSDI-002-EVAL-B |
Evaluation kit for Harrier 3G-SDI. The kit contains power supply, cabling (AS-CIB-CBLKIT-002-B), micro-coax cable (AS-CIB-USL30-100MM, for connecting camera with camera interface board) and the Harrier Evaluation Board with PC serial interface (via USB). Not included: Camera and camera interface board. |
| AS-CIB-3GSDI-002-A |
Harrier 3G-SDI Camera Interface Board. Analog composite output (when in 720p50/59.94/60 operating modes). Support for HD-VLC compression technology. Board only, no cables included. |
| AS-CIB-USL30-100MM |
30-way micro-coax cable for connecting the interface board to the camera. Length 100mm (Manufacturer: KEL, part number: USL20-30SS-010-C). |
| AS-CIB-USL30-50MM |
30-way micro-coax cable for connecting the interface board to the camera. Length 50mm (Manufacturer: KEL, part number: USL20-30SS-005-C). |
| AS-CIB-CBLKIT-002-B |
Cable kit for AS-CIB-3GSDI-002-A containing H.FL micro coax cable, BNC adapter and control cables for J2 and J3. Included in the Evaluation Kit for Harrier 3G-SDI. |
| AS-CIB-BRK-001-A |
Bracket to fit the interface board AS-CIB-3GSDI-002-A to the side of a Tamron MP3010M-EV camera after removing the original base bracket. |
If you're looking for long cable length solutions that guarantee high quality HD video transmission over greater distances we recommend HD-VLC technology. Check out our white paper on Long-reach HD video transmission technologies and this video:
Watch this video to learn more about Harrier AF-Zoom cameras:
